Skip to main content
  • Get Ready For Winter Storage

    Winterize

WINTERIZING – STERNDRIVE

(4,6,8 Cylinder) Full Winterize (Southwinds Indoor storage only)
Includes:
Fuel/storage additive, pump out waste tank, change oil & filter, remove stern drive, check alignment, UV joints, gimbal bearing, inspect engine coupler, gimbal ring, input shaft, change gear oil, replace drain screw washers, grease all, torque check gimbal ring, drain block & manifolds, disconnect all batteries, load test batteries, 20 point inspection and report.


WINTERIZING – INBOARDS

(4,6,8 Cylinder) Full Winterize Single Engine
Includes:
Fuel/storage additive, pump out waste tank, change engine oil & filter, transmission oil, “V” Drive oil, drain engine block & manifolds, disconnect all batteries, load test batteries, 20 point inspection and report.


WINTERIZING – OUTBOARDS

(4 Stroke) Full Winterize
Includes:
Fuel/storage additive, change engine oil & filter, change lower unit gear oil, disconnect all batteries, load test batteries, 20 point inspection and report.


(2 Stroke) Full Winterize

Includes:
Fuel/storage additive, drain any/all coolers, change lower unit gear oil, disconnect all batteries, load test batteries, 20 point inspection and report.


WINTERIZING – UNPACKAGED ITEMS

WIP05 Water System / Large System
Drain complete water system & winterize. Includes head[s], freshwater tank and lines, air conditioner[s], ice maker[s], wash down, bilge, live well[s],

WIP06 Winterize Generator
Fuel/ storage additive, change oil and filter, drain block and manifold, disconnect battery, all parts and labor included.


To book service work, or for an estimate contact:

705-445-7638
service@southwindsmarine.com